The new TAG Heuer Carrera Sport Chronograph 44mm collection, each fit with a Caliber Heuer 02 movement.
TAG Heuer continues to celebrate its 160th anniversary with the launch of fourCarrera Sport chronographs, all now updated with the watchmaker’s own Caliber Heuer 02 movement, which boasts an eighty-hour power reserve and a chronograph with a column wheel and a vertical clutch.
In addition to the technical upgrade, the new models also offer a newly beveled inner flange around the dial, shorter lugs than earlier Carrera designs and a 44mm case with alternating polished and fine-brushed finishes.Also new is the dial finish. The new watch dials glow with circular brushing in a choice of deep blue with a matching ceramic bezel, olive green with a stainless-steel bezel or one of two black-dialed models, each with a black ceramic bezel.
New dials
With the new models, TAG Heuer offers four more solid-dial options within the Carrera chronograph collection outfitted with the Caliber Heuer 02 movement, most of which currently power Carrera chronographs with open dials.
Within these newly finished dials TAG Heuer alters the layout of the three sub-dials, which here differ from those seen on existing Carrera chronographs that are fit with the Caliber 16 movement.
The hour counter for the chronograph (here at 9 o’clock) also differs from those existing Carrera chronographs with inclusion of the numerals 12, 4 and 8 to better balance the minute counter, which is now at 3 o’clock.
TAG Heuer also moves the date to 6 o’clock, which differs from existing Carrera chronographs that use the Caliber Heuer 02 movement, where the date is in the 4:30 position. Finally, wearers can expect a somewhat lighter Carrera chronograph thanks to the new, thinner H-shaped bracelet.
Rose gold accents
While all four new Carrera Sport chronographs are cased in steel, one black-dialed model offers rose gold accents. For this watch, TAG Heuer filled its black ceramic bezel with a fetching rose-gold-colored lacquer, and then matched it with an 18-karat gold crown and push buttons.
Also for this model, TAG Heuer fits a black PVD-coated brass rotor (visible through the sapphire crystal caseback) and then prints watch specifications on it using a rose gold printing process.
TAG Heuer launches this new Carrera Sport lineup this month following the launch of the TAG Heuer Carrera 160 Years Silver and the 160 Years Montreal Edition limited editions earlier this year.
The La-Chaux-de-Fonds based watchmaker is not done celebrating its 160th anniversary yet. TAG Heuer says it will unveil four more “core novelties” as well as two special editions before the end of the 2020 anniversary year.
Prices: $5,350 to $20,400 (with rose-gold accents).
Parmigiani Fleurier introduces a sportier Tonda with the release of its new Tondagraph GT, a steel-cased chronograph inspired by the excellent Tonda Chronor, which won the Chronograph Watch Prize from the Grand Prix d’Horlogerie de Genève in 2017.
The new Parmigiani Fleurier Tondagraph GT, a 42mm steel-cased chronograph with annual calendar.
The watchmaker also adds the Tonda GT, a three-hand version of the new model, a more leisurely design to be made as a limited edition in both a steel and a rose gold case.
The new Parmigiani Fleurier Tonda GT Steel, on a rubber strap.
Both the chronograph and three-hand model (with date) measure 42mm in diameter and feature a distinctive Parmigiani Fleurier “clou triangulaire” guilloché dial, a three-dimensional hobnail-type pattern that serves to nicely separate each dial display.
The chronograph
Parmigiani Fleurier powers its new sporty chronograph with the in-house PF043 automatic caliber that features a chronograph with, unusually, an annual calendar. As a reminder, an annual calendar shows the correct date and day all year, with only one correction required (on February 29). Combining these features places the watch among only a few high-end Swiss Made watches available with both these features.
Two subdials are dedicated to the chronograph display; the display at 3 o’clock is shared by the month aperture and the running seconds.
Parmigiani Fleurier has accented the large date and month displays with an orange color to both highlight and separate that function visually from the time and the chronograph timing. In fact, ‘annual calendar’ appears – in orange –within the subdial to visually tie the function together.
The case itself, designed by Dino Modolo, reprises the fluted bezel seen on the brand’s Toric models and on at least one model of the limited edition Tonda Chronor, but with smoother curved lugs that perfectly integrate the case with the new steel bracelet.
The dial features delta-shaped hands with a black luminescent coating. Water resistant to 100 meters, the Tondagraph GT also offers a screw-down crown and a 45-hour power reserve.
Parmigiani Fleurier’s PF043 automatic movement, with a power reserve of forty-five hours, powers the watch and is finished with Côtes de Genève stripes visible through the open caseback. Price: $18,500 (on an integrated rubber strap) and $19,500 (bracelet). The Tondagraph GT is limited to 200 pieces.
The three-hander
The Tonda GT offers a cleaner guilloche dial finished with the same pattern as the chronograph, but here the dial underscores a simple hour and minute hands display with a large date at 12 o’clock and a small seconds subdial at 6 o’clock. Parmigiani Fleurier’s PF044 automatic movement, with a power reserve of forty-five hours, powers the watch.
Unlike the chronograph, the Tonda GT will be made in both steel and rose gold. The latter precious metal model further differentiates itself with a stunning blue dial and can be had with either a gold bracelet or a sporty blue rubber strap matching the dial. The Tonda GT Steel, likewise, is available with a steel bracelet or a black rubber strap.
The Tonda GT Rose Gold Blue is limited to 150 pieces, while the steel model is limited to 250 pieces. Prices: $13,500 (Tonda GT Steel on rubber strap), $14,500 (Tonda GT Steel on bracelet), $49,500 (Tonda GT, blue dial on a rose gold bracelet, and $24,900 (Tonda GT, blue dial in gold case on rubber). Availability: Pre-order now with delivery in August (Tonda GT with bracelet only in September).
Oris has once again partnered with the Florida-based Coral Restoration Foundation to create the new Aquis Carysfort Reef Limited Edition, a steel version of the fifty-piece gold limited edition introduced earlier this year. The new model will offered as a limited edition of 2,000 timepieces. Sales will support the Foundation.
The new Oris Aquis Carysfort Reef Limited Edition, with steel bracelet.
The Carysfort Reef collection is named for the eponymous coral reef in the Florida Keys National Marine Sanctuary. It is part of the Florida Reef Tract, the third largest barrier reef in the world and the only barrier reef in the United States. Sadly, a changing climate has caused it to degrade over the past several decades and the coral populations to concurrently dwindle. This, in turn, affects the health of our oceans, which produce seventy percent of the world’s oxygen.
The watch
The new watch features a 43.5mm steel case with a bi-directional ceramic bezel and GMT scale. The watch’s blue gradient dial forms the backdrop for SuperLuminova-treated hands and indexes and a date window at three o’clock, while the solid screwed caseback features special engravings alluding to the brand’s support of Carysfort Reef. Oris has worked with the Coral Restoration Foundation since 2014.
As you might expect, Oris has made the watch fully prepared for use outdoor and even underwater. The watch is water resistant to 300 meters, thanks in part of its screw-in stainless steel security crown.
The automatic movement (the Sellita-based Oris 798) includes multiple functions: hours, minutes, seconds and 24 hour indication via central hands, as well as an instantaneous date and 24-hour corrector, fine timing device and stop seconds. Its power reserve is 42 hours.
The back of the watch shows its solid screwed caseback with engravings noting Oris’s support for the Carysfort Reef.
In its new steel case, the Oris Aquis Carysfort Reef Limited Edition can be strapped to the wrist with a solid Oris stainless steel bracelet or an orange rubber strap, both of which are complemented by a stainless steel security folding clasp with an extension. The presentation box is both attractive and satisfying: it is constructed using sustainable algae. Prices: $3,000 (metal bracelet) and $2,800 (orange rubber strap).
I would like to share a hopeful story with you about an American Master Watchmaker working to achieve his lifelong dream.
For the past forty-five years, Don Loke has enjoyed a long and successful career as a professional master watchmaker and most recently has launched D Loke, his eponymous bespoke watch collection.
Loke’s deep watchmaking training and industry history has prepared him well for this most recent venture.
The watchmaker
Don Loke graduated in 1978 from the Bowman Technical School in Lancaster, Pennsylvania, and then worked with a master watchmaker in Meriden, Connecticut.
Master watchmaker Don Loke at his atelier in Connecticut .
After this experience, he went back to Bowman and took clock making courses to finally finish in 1984. After Lancaster, Loke attended WOSTEP, the Watchmakers of Switzerland Training and Educational Program, in Neuchâtel, Switzerland, where he graduated first in his class.
Learning from Masters
While he was at school he met Michel Parmigiani and Philippe Dufour—two master watchmakers and renowned personalities in the Swiss luxury watch industry.
This was just the beginning. Post-graduation, he was invited by Breguet and Jaeger-LeCoultre for training in Switzerland and became the official after-sale person for Breguet in the U.S. when it was still owned by Chaumet. He also worked for two years with Master Watchmaker Dennis Harmon, in Waterbury, Connecticut, after which he became Technical Director of movement maker ETA for the American market. Loke soon joined UTAC Americas (which distributed Audemars Piguet, Breguet, Bertolucci, and Girard-Perregaux) as its technical director.
During this time, Loke also learned from Master Watchmaker Daniel Roth in Switzerland, who taught him the ins-and-outs of the highly complex tourbillon mechanism. By the mid-1990s, Loke worked with prominent companies such as Sotheby’s, Christie’s, Gerald Genta, and Daniel Roth.
Loke served as U.S. representative for Parmigiani Fleurier in the U.S. for more than six years.
When Loke found out that Michel Parmigiani was striking out on his own, Loke reached out to his old friend and eventually became the U.S. representative for Parmigiani Fleurier for more than six years. Don even interacted with legendary horologist George Daniels, discussing his new escapement and the double-wheel escapement Loke eventually developed. After seven years, he turned the escapement into a Solidworks program.
George Daniels and Don Loke
High-level services
When Don Loke is not working on his own bespoke projects, he services incredible watches, ranging from minute repeaters to chronographs. He also restores intricate timepieces that require special attention, recreating parts from scratch to make identical versions of the original components. At the same time, he currently is in charge of the North American Service Center for Louis Moinet—a brand that makes exceptional watches that range between $80,000 and $350,000.
Loke currently is in charge of the North American Service Center for Louis Moinet. Pictured is the Louis Moinet Memoris Red Eclipse.
As you can see, Loke’s specialty is working on high-complication timepieces and his passion for watches and watchmaking has only augmented over the decades.
Own brand: D Loke
After all these years of dedicating his time to other brands and watches, Don Loke recently began to make eponymous bespoke watches. He established two shops. One is the “clean room” to house machinery for fine turnings, cuttings, wheel making, and pinion producing. He has a microscope for measuring, a guilloché machine with forty-two discs for dial decorating, and an oven for enameling.
Loke at his workshop.
This room is also where Don Loke stores his sketches, drawing, layouts, and 3D modeling. The other is the “dirty room” for more heavy type work. Prototyping takes place at his shops and production models are executed with CNC technology.
Loke’s guilloche machine.
Dress chronographs
The first D Loke watch model is a chronograph dress watch—an idea Don Loke stored in the back of his mind for decades—where the chronograph pushers are hidden from sight.
Inside the 5 ATM water-resistant titanium case is a dial with asymmetric sub-dials and ornately cut center hands resembling blades. The rich blue details on the dial change color depending on the light, and there’s a crown at 9 o’clock to rotate the inner timing bezel.
Two D Loke dress chronographs.
The limited edition D Loke dress chronographs run on chronometer-rated Concepto calibers, a hybrid Swiss movement based on the ETA Valjoux 7750.
The Concepto Cal. 8100 (quality 1) decorated movement regulated by Loke to chronometer standards.
The watches took six months from design to manufacturing, and while the watch is made in Switzerland, the quality control and finishing are done in the U.S. There are twenty-five examples of the white-dial version, twenty-five examples of the white dial (with a blue bezel) version, and 300 examples of the blue dial version.
Although the watches are currently only available for purchase directly from Don Loke, his goal is to be in stores like Manfredi Jewels or Betteridge.
D Loke dress chronograph on the wrist.
Second model
Loke is already working on his second watch model and is currently completing the prototype of a new lever escapement. At the heart of the watch will be a 100% proprietary movement, based on Don Loke’s design and technical drawings – his very own invention.
Loke says he will source handmade gold dials from J.N. Shapiro in California. As a result, this will be a handmade watch made entirely in the United States. Don expects to manufacture five prototypes in the first year and he will become the first American watchmaker to make his own high-end watch powered by his own movement. The aim is to present this timepiece to the U.S. market by the end of 2020 with a price tag of $65,000 to $75,000.
Daniels connection
The third D Loke watch model will be a model with a double pivoted and spring detente escapement—invented by Don Loke based on conversations he had with George Daniels.
Yet again, this is his invention, with designs and technical drawings built from scratch. With already twenty-five orders in the books for this upcoming watch model, the American market should see it by the second quarter of 2021 with a price tag of $175,000.
Ultimately, it is Don’s dream to have his own watch on his wrist. Another goal of his is to bring his three children into the business. All are highly skilled engineers.
With all of these ideas and designs, including a future tourbillon piece, Loke is going to need plenty of talent and skill.
I love this spirit of entrepreneurship, and I wish Don Loke the very best and abundant success with his new company. Stay tuned for the end of the year when he unveils his new watches.
Laurent Martinez is the proprietor of Laurent Fine Watches Greenwich, Connecticut. Read more by him at blog.laurentfinewatches.com (where this article first appeared) or visit his store’s site at www.laurentfinewatches.com
Tudor expands its flagship Black Bay Fifty-Eight this week with a new model sporting a navy blue dial and matte blue bezel.
The new Tudor Black Bay Fifty-Eight Navy Blue, also available with two different fabric straps.
The retro-styled 39mm Black Bay Fifty-Eight, which quickly became a Tudor best seller after it debuted in 2018, traces its lineage back to Tudor dive models from the early 1950s, with most of its features linked to the Tudor reference 7924 from 1958, known as the Big Crown edition.
Gone are the gilded touches to the markers, bezel and the hands we saw on the Black Bay Fifty-Eight from two years ago. Here Tudor replaces those accents with sportier steel on the dial and silver-colored markers and numerals on the bezel, perfectly matching the case and bracelet.
Modern movement
As with the 2018 black-dialed edition, the new Black Bay Fifty-Eight Navy Blue inhabits its retro style while steeped in modern technology, most notably underneath its dial. There you’ll find an in-house Tudor Caliber MT5402, an automatic caliber with a non-magnetic silicon balance spring and an impressive seventy-hour power reserve.
Tudor’s own automatic manufacture Caliber MT5402 with bidirectional rotor system, Swiss chronometer certified by COSC.
Tudor notes that its caliber, tailor-made by Tudor for the 2018 Black Bay Fifty-Eight, performs with greater precision than its official COSC chronometer certification requires. Where COSC allows for an average variation in the daily running rate of a watch movement of between -4 and +6 seconds in relation to absolute time, Tudor says it applies a tolerance of between -2 and +4 seconds’ variation in its daily rate on the assembled watch.
While the front and even the sides of the new watch recall their origins in the 1950s and 1960s (notably regarding the Snowflake hands, seen first in 1969), the closed caseback gives away the game with engraved references to the manufacture caliber within.
Unscrewing the back, a watchmaker (or intrepid owner) would see a distinctly modern finish on the MT5402 caliber, notably a one-piece tungsten rotor that Tudor has open-worked, satin-brushed and sand-blasted. Tudor also alternates sand-blasted surfaces, polished surfaces and laser decorations on the movement’s bridges and mainplate.
Straps & bracelet
Those familiar with Tudor will know that its modern identity, and its success, is in part due to its unerring facility with fabric NATO-style straps, which the brand has embraced wholeheartedly since at least 2010.
Tudor continues that tradition with the new Black Bay Fifty-Eight Navy Blue, for which Tudor offers a handsome navy blue and silver-striped woven fabric strap (above) made in France by Julien Faure, a 150-year old family company. Tudor also offers a riveted steel bracelet (polished and satin finish) with folding clasp and safety catch and a blue “soft touch” strap with folding buckle and safety clasp.
Tudor offers this blue “soft touch” strap with folding clasp and safety catch as an option with the Black Bay Fifty-Eight Navy Blue.
The remaining Tudor-curious collectors who were not sold on the 2018 Black Bay Fifty-Eight’s slightly luxe black and gold accented dial and bezel back in 2018 have their watch with this new Black Bay Fifty-Eight Navy Blue. It’s sportier, beautifully blue-hued and supplies the same Tudor high-value mechanicals teamed with expert retro dress.
With the same pricing as the earlier model ($3,700 for the bracelet model and $3,375 for fabric strap), the watch serves up no visible obstacles to any motivated fan.
Movement: Automatic manufacture Caliber MT5402 with bidirectional rotor system, Swiss chronometer officially certified by COSC, 70-hour power reserve, variable inertia balance, micro-adjustment by screw, non-magnetic silicon balance spring; 28,800 bph (4 Hz) frequency.
Case: 39mm steel with polished and satin finish, unidirectional rotatable bezel in 316L steel with 60-minute graduated disc in matte blue anodized aluminum and silver gilded markings and numerals, steel screw-down winding crown with the Tudor rose in relief, with circular satin-brushed 316L steel winding crown tube, domed sapphire crystal, water resistant to 200 meters
Dial: Navy Blue, domed
Bracelet: Riveted 316L steel with polished and satin-brushed finish, or blue “soft touch” with folding clasp and safety catch, or blue fabric strap with silver band and buckle.
Prices: $3,700 (bracelet model) and $3,375 (either fabric strap)
Also for this model, TAG Heuer fits a black PVD-coated brass rotor (visible through the sapphire crystal caseback) and then prints watch specifications on it using a rose gold printing process.
The three-hander
Unlike the chronograph, the Tonda GT will be made in both steel and rose gold. The latter precious metal model further differentiates itself with a stunning blue dial and can be had with either a gold bracelet or a sporty blue rubber strap matching the dial. The Tonda GT Steel, likewise, is available with a steel bracelet or a black rubber strap.
Availability: 
The automatic movement (the Sellita-based Oris 798) includes multiple functions: hours, minutes, seconds and 24 hour indication via central hands, as well as an instantaneous date and 24-hour corrector, fine timing device and stop seconds. Its power reserve is 42 hours.
