Chronoswiss twists its regulator display from vertical to horizontal with the all-new Strike Two Series, a limited edition collection with two dial-side bridges and a stunning hand-guilloched seconds dial.
Echoing existing Chronoswiss regulator-dial watches with a vertical layout, such as its Open Gear series, the new Strike Two offers a familiar, contemporary Chronoswiss look, but with a slimmer, smaller case that places its hour subdial at the 3 o’clock position instead of at the top of the dial.
Similarly, Chronoswiss has also rotated the seconds dial, here located at the 9 o’clock position. The primary hand, indicating minutes, remains centrally positioned as is the case with most regulator dials. 
Measuring 40mm in diameter, smaller than most 42mm Open Gear models, and with a 12.7mm thickness, Strike Two’s horizontal layout is not a first for this Lucerne-based independent, which introduced the design in its Tora collection in the 1990s.
But while the Tora series primarily featured a dual-time indicator with its 24-hour subdial, the new Strike Two is decidedly a local time affair. 
Two models
Chronoswiss offers two models in the new collection, the H2O and the Golden Gear, each released as a limited edition of one-hundred pieces.
Both are cased in steel, with the H20 model boasting a light blue CVD dial and the Golden Gear edition presenting a slate-colored satin-finished dial with gold accents.
Called Strike Two to call attention to the movement’s twin bridges, the new series also showcases the watch’s gear work, which is notably visible underneath the hour ring. 
Known for its beautiful hand-guilloched craftsmanship, Chronoswiss places a sample of this artisanal expertise within the small second dial, which is beautifully finished with a floral pattern.
For Strike Two, Chronoswiss has redesigned its onion crown, creating a slightly smaller version than we’ve seen previously, and adding a flattened end cap.
Inside each watch Chronoswiss fits new Chronoswiss Manufacture Caliber C.6000, developed in collaboration with La Joux-Perret and previously seen in a slightly different guise powering the revamped Chronoswiss Delphis.
The movement features a 55-hour power reserve, a ruthenium-coated finish, a tungsten rotor, radial Côtes de Genève finishing and a skeletonized gear train.
Price: CHF 9,800.
Specifications: Chronoswiss Strike Two
(References: CH-5023-BLSI (H2O) / CH-5023-ANGO (Golden Gear), Limited Edition of 100 each.)
Case: 40mm by 12.7mm solid 17-part stainless steel case, ground and polished, polished bezel with fluted decorative ring on the side and domed, double anti-reflective sapphire crystal; screwed and satin-finished case back with sapphire crystal, onion crown, water-resistant to 3 bar, screwed strap links.
Movement: Chronoswiss manufacture caliber C. 6000 (collaboration with La Joux-Perret), automatic with skeletonized rotor made of tungsten, ball bearing; armature, escape wheel and screws polished; bridge with Geneva cut, ruthenium plated, 55-hours power reserve.
Dial: Horizontal regulator, hour display at 3 o’clock (open gear with two vertical bridges), central minute, second at 9 o’clock, hand guilloché. SuperLumiNova indexes. Bottom level with vertical satinage (Golden Gear) or stamped and CVD-Coated (H2O).
Strap: Calfskin with alligator embossing, rubber optional.
Price: CHF 9,800.
Comments are closed.