iW Magazine
News & Now

Eberhard & Co. Chrono 4 Geant Full Injection – Limited Edition

The Chrono 4 Géant collection is being enhanced with a new black edition: Chrono 4 Géant Full Injection.  The timepiece, which combines technique and aesthetical elegance, is produced in a limited edition of 500 pieces.

The complexity of the construction process is what makes this chronograph unique.  The 46 mm case of Chrono 4 Géant Full Injection uses a low temperature carbon diffusion treatment.  This allows the carbon to penetrate the steel surface for 30 micrometers, thus producing a structural hardening.

With the increase of the steel’s hardness – the resistance to fatigue has greatly improved.  The Diamond Like Coating gives the watch a particularly sporty and attractive look.

The black shade is extended to the chronograph push buttons and crown and the black dial, with black counters and red counter’s hands, features a circular metal plate.  The name of the model – Full Injection – is engraved on the case-back.  Water-resistant to 200 meters, this chronograph comes with a vertically sculpted rubber strap.

Chrono 4 Geant Full Injection – Limited Edition Stats

Reference: 31062. Limited edition of 500 pieces

Movement: Caliber EB. 250 12 1/2 ” – basis ETA 2894, mechanical chronograph with automatic winding. Eberhard & Co. device with 4 counters in line: minutes, hours, 24 hours and small seconds – date, 53 rubies.

Case: In steel, submitted to a hardening treatment through a low temperature process that diffuses carbon into the steel with a penetration of 30 μm, thus increasing fatigue-limits and shock-resistance. With DLC-Dianoir(R) carbon treatment providing a black coating.

Diameter of the case: 46 mm

Thickness of the case: 14,10 mm

Caseback: With engravings, fixed by 8 screws.

Water-resistance: 200 m

Crown: With DLC-Dianoir(R) carbon treatment ; screwed-in crown with crown guard and engraved elements to provide optimum grip; personalized with the ancient shield, symbol of the Maison, in bas-relief.

Push-button: With DLC-Dianoir(R) carbon treatment ; screwed-in, with engraved elements to provide optimum grip; decorative black PVD-treated screws

Bezel: with DLC-Dianoir(R) carbon treatment, unidirectional rotating bezel, featuring 6 black PVD-treated screws and black engraved numerals

Glass: sapphire, non-reflective

Dial: Black with black counters, azure finish, red counters’ hands. Applied indexes, luminescent - date at 12 hours. Central seconds hand in red. Tachometer scale in km/h on the flange. Metal plate with Côtes de Gèneve finish.

Hands: sword-shaped, skeleton-carved, luminescent

Strap: black rubber, vertically sculpted, personalized with the E shield engraved in bas-relief – E&C personalized steel buckle with DLC-Dianoir(R) carbon treatment

Note: Patented – Registered Design

iW InsideriW Insider brings you news and new watches from new and well-known brands each week.
Sign up now to keep “watching.”
There was a problem. Please try again.
Thank you!